EARTHING Products Recovery Bag for Sports Rejuvenation and Travelling

Price: $395.00


The conductive EarthingTM Recovery Bag was created especially for Tour de France cycling teams and other athletes for the purpose of accelerating recovery from extreme physical activity. Users slip between the top and bottom sheet, as they would a sleeping bag, while resting or sleeping. The EarthingTM Recovery Bag can be rolled up and stuffed in a small bag. It is very popular with travellers and athletes. The EarthingTM Recovery Bag is 101.6 cm wide and the fabric is made from cotton with conductive silver fibres in a matrix throughout the cotton. The EarthingTM Recovery Bag connects to the Earth with a ground cord. One end of the cord snaps onto the EarthingTM Recovery Bag and the other end inserts into an electrical outlet ground port via a plug or to a ground rod outside.

The EarthingTM Recovery Bag Sleep System is a sand colour poly/cotton sleeping bag or sheet containing woven-in conductive silver fibres. Lying or sleeping in the EarthingTM Recovery Bag connects you to the earth during sleep. This product is primarily used by athletes and those who travel extensively, but is a wonderful option for those who like to move their sleeping spot around frequently or who just want the flexibility of a sleep bag and a sheet in the same product.

Kit Includes:
Conductive EarthingTM recovery bag with 15-foot (4.57 m) EarthingTM cord.

Recovery Bag Size: 40″ x 84″, open is 80″ x 84″.
Suggested Usage: The Recovery Bag can be used on your bed, or when traveling, either like a sleeping bag or it can be utilized like a bottom sheet. Zipped up, the recovery bag allows one person to comfortably slip into it as a sleeping bag. When unzipped and open, the Recovery Bag can accommodate two people sleeping on top of it.

Step 1: Setting Up Your Recovery Bag
1. Place the Recovery Bag, either unzipped or zipped, over your mattress or bottom sheet.
2. Insert the bung end of the EarthingTM Cord into the Adapter Plug and insert the Adapter Plug into a properly grounded wall outlet power point.
3. Alternatively, connect the bung of the cord to an EarthingTM Ground Rod placed in moist conductive Earth outside.
4. Find the connecting tab on the Recovery Bag and snap the other end of the EarthingTM cord onto the tab.
5. When you lie down on the opened bag, or inside the zipped bag, any bare skin contact will transfer the Earth’s energy to your body once you connect the sheet.

Step 2: Testing Your Recovery Bag With The Product Tester
The purpose of the Product Tester is to verify that your EarthingTM Recovery Bag is conductive.
1. Insert the prong end of splitter into the grounded outlet or the ground rod cord.
2. Plug the EarthingTM cord from the Recovery Bag into one of the two splitter receptacle ends.
3. Insert the prong end of the tester cord into the other splitter receptacle.
4. Place the product tester flat on the recovery bag. The round metal plate must be in contact with the surface of the Recovery Bag. Press firmly on the fabric to obtain a good contact. A green light means that the bag is in working order.
5. Disconnect the splitter from the ground connection, then disconnect cords from the splitter.
6. Re-insert the EarthingTM cord from the Recovery Bag into the ground connection.
7. You don’t have to test your Recovery Bag often, just occasionally after washing. The more you use the tester, the sooner the batteries in the tester will expire. The tester contains two replaceable batteries.

In the unlikely case that no green light comes on, the bag may be defective or may have lost conductivity. However, sometimes people have difficulty testing their recovery bag or sheet, so please read the following:

If the light doesn’t come on, place one hand anywhere on the Recovery Bag while holding the tester in the other hand and with one finger on the silver button on back of tester. A green light would show that the body is grounded when touching the sheet. Make sure that both the tester and the Recovery Bag are plugged in to the ground, as described above. One reason for the light not going on can be that you aren’t pressing hard enough on the tester. The surface fabric of the Recovery Bag sometimes prevents the button from contacting the conductive silver fibers of the Recovery Bag. The surface seems smooth, but if you were to look at it with a microscope you would see “hills and valleys.”The pliant surface of the skin, unlike the hard metal button, will bend around fibers and make good contact. You can also put some moisture on your finger tips to create a better contact.

Step 1: Washing
The EarthingTM Recovery Bag may be machine washed using warm setting, approximately 105 degrees Fahrenheit (40 celsius). Do not use chlorine bleach or liquid fabric softener, or any detergent containing bleach or fabric softener, or chemicals that can ruin the conductivity of your EarthingTM Recovery Bag. When necessary, use hydrogen peroxide-based non-bleach to remove stains and/or to whiten.

Step 2: Drying
Tumble dry using medium setting, up to 150 degrees Fahrenheit (65 Celsius). Do not dry clean.

Do not apply lotions, creams, or oils to the skin before bedtime on parts of your body that will be in contact with the EarthingTM Recovery Bag. Such substances oxidize and can damage conductivity.

It is strongly recommended that individuals consult their Doctor for advice and a medication monitoring routine when they begin sleeping earthed, if they are taking any medication to:
•thin the blood,
•regulate blood sugar,
•control blood pressure, or
•regulate thyroid hormone levels.

For more medical information CLICK THIS LINK.

Although it is unlikely that you will be hit by lightning, it is recommended to follow standard lightning safety guidelines as directed by the National Weather Service and disconnect your EarthingTM devices during lightning and thunderstorms.